Contact us RV's For Sale Order Form Links 2013 Catalog

                Home
NEW PRODUCTS FOR 2012
AIR CONDITIONERS
ANTENNA & PHONE
AWNINGS
BRAKE CONTROLS
CAMPER TIE DOWNS
CONVERTER
COVERS
DISTRIBUTION HITCHES
DOOR HARDWARE
ELECTRICAL
FAUCETS
FRESH WATER
5TH WHEEL HITCHES
FURNACES
GENERATORS
HITCH ACCESSORIES
HOUSEWARES
INVERTERS
JACKS
LATCHES & CATCHES
LIGHTS & LENSES
LP GAS
MUD FLAPS
OUTDOOR ACCESSORIES
PUMPS & FILTERS
RACKS & CARRIERS
REFRIGERATOR
RV MAINTENANCE
SCREEN DOOR
SEWER
STABILIZERS
STEPS & LADDERS
SOLAR PANELS
TIRES & WHEELS
TOILETS
TOWING
TP & CHEMICALS
TRAILER WIRING
TV & STEREO
VENTS & FANS
WATER HEATER
WHEEL CHOCKS
WINDOW ACC.
WINTERIZING

Order Number Tongue Jacks Manufacture Number Price
70097 1,000 LBS Atwood Top Wind A-Frame Jack

An A-Frame jack with triangular brackets that provide easy bolt-on or weld-on mounting. Casters or feet (not included) quickly install on jack ram. Black.

1,000 lb. Cap.;

A=2.6" Retracted,

17.7" Extended;

B=13.6"; C=6.0"

80009 $49.99
70496

2,000 LBS ATWOOD TOP-WIND A-FRAME JACK

An A-Frame jack with triangular brackets that provide easy bolt-on or weld-on mounting. Casters or feet (not included) quickly install on jack ram. Black

Atwood Top-Wind A-Frame Jack:

2000 lbs. Capacity; A=2.0" Retracted, 17.1" Extended; B=13.2"; C=7.0"

 

 

 

80401 $49.99
70070

 

 

5,000 LBS ATWOOD TOP-WIND A-FRAME JACKS

An A-Frame jack with triangular flanges that provide easy bolt-on or weld-on mounting through A-Frame couplers. Casters or feet (not included) quickly pin on. Heavy duty A-Frame jacks have greater lift capabilities and increased structural integrity for today’s heavier tongue

Atwood Top-Wind A-Frame Jacks:

5000 lb. Capacity; A=1.4" Retracted, 15.5" Extended; B=10.7"; C=9.5"

  

80391 $49.99
70098 1,000 LBS ATWOOD SIDE-WIND A-FRAME JACKS

A-Frame jacks with triangular brackets, provide easy bolt-on or weld-on mounting through A-Frame couplers. Casters or feet (not included) install on jack ram.

Side-Wind A-Frame Jack:

 

 

 

80000 $63.99
70100

 2,000 LBS ATWOOD SIDE-WIND A-FRAME JACKS

A-Frame jacks with triangular brackets, provide easy bolt-on or weld-on mounting through A-Frame couplers. Casters or feet (not included) install on jack ram.

Side-Wind A-Frame Jack:

87510 $51.99
72282

 

1-3/4" dia. Duraplas twist-lock caster.  Fits 1000# jacks

80259 $27.99
70088

 70088 Caster Wheel

  2" dia ram

 

 

 

80552 $25.99
 70082 Jack Foot No Picture

Atwood Jack Foot extension tube 6-3/4"

82660 $17.99
79252  

 

 

 

ATWOOD LIGHT WEIGHT 1500# POWER JACK

Atwood Power Jack 2500# Jack

Fits most 2-5/16" Couplers

Atwood power jacks make positioning a trailer hassle free. Just push a button to quickly and effortlessly raise or lower the trailer into position with complete control. It cannot change position until powered, giving you complete control over jack and trailer movement at all times. They are ideal for long-term storage-unaffected by temperature variations, providing solid consistent performance regardless of the weather. The rugged 12VDC electric gear motor easily lifts heavy loads and is proven in years of RV use under adverse conditions. The motor is  protected by a durable high-density, white polyethylene cover. These jacks are permanently lubricated for years of trouble-free use.

80511

$324.99

72821   ATWOOD LIGHT WEIGHT 1500# POWER JACK

Atwood Power Jack 2500# w light

Fits most 2-5/16" Couplers

Atwood power jacks make positioning a trailer hassle free. Just push a button to quickly and effortlessly raise or lower the trailer into position with complete control. It cannot change position until powered, giving you complete control over jack and trailer movement at all times. They are ideal for long-term storage-unaffected by temperature variations, providing solid consistent performance regardless of the weather. The rugged 12VDC electric gear motor easily lifts heavy loads and is proven in years of RV use under adverse conditions. The motor is  protected by a durable high-density, white polyethylene cover. These jacks are permanently lubricated for years of trouble-free use.

 

80515 $309.99
87646 ATWOOD LIGHT WEIGHT 1500# POWER JACK

Atwood Power Jack  3500# w/ light

Fits most 2-5/16" Couplers

Atwood power jacks make positioning a trailer hassle free. Just push a button to quickly and effortlessly raise or lower the trailer into position with complete control. It cannot change position until powered, giving you complete control over jack and trailer movement at all times. They are ideal for long-term storage-unaffected by temperature variations, providing solid consistent performance regardless of the weather. The rugged 12VDC electric gear motor easily lifts heavy loads and is proven in years of RV use under adverse conditions. The motor is  protected by a durable high-density, white polyethylene cover. These jacks are permanently lubricated for years of trouble-free use.

 

80717 $419.99
86347 Barker VIP Jacks

3,000 lbs lifting capacity 2" diameter outer post

18" stroke, night light, level, attached foot pad, powder coated, emergency crank, sealed waterproof and 10 gauge wire for ease of hookup

 

30826 $339.99
86348 Barker VIP Jacks

3,500 lbs lifting capacity 2-1/4" diameter outer post

18" stroke, night light, level, attached foot pad, powder coated, emergency crank, sealed waterproof and 10 gauge wire for ease of hookup

30828

$394.95

87247  

Husky Brute Power Jack, 4500#

Model HB4500, with 4,500 lb. capacity and level. 2-1/4" jack diameter.

The Brute is fast, with a travel speed of 10 inches 38 seconds. It does the job, with an 18 inch full stroke and 6 inch drop down leg. It’s tough, with hardened steel gears. It’s secure, with weather protected switches and a water resistant enclosure. It’s versatile, fitting all A-Frame couplers. It’s economical, with a low 25A draw at rated load. Three LED work lights, a built-in connector storage bracket not found on any other power jack, and a 30A circuit breaker. Less Friction: The Brute is the only power jack in its price range that has a ball screw, which reduces friction compared to the ACME screw used on some other brands. The ball bearings roll through the threads on the Brute’s shaft and nut. • Allows the motor to work less • Draws less amperage • Creates less heat • Reduces noise • Increases motor and jack life. The Husky Brute is the new standard in RV jacks. 

87247 $349.95
87248

Husky Brute Power Jack 3000#

Model HB3000, with 3,000 lb. capacity and a 2-1/4" jack diameter.

Now you can have all the best features of a variety of other power jacks plus more, all built into a Husky-tough, Husky-convenient power jack. The Husky Brute is loaded with features not found on some other power jacks. The Brute is fast, with a travel speed of 10 inches 43 seconds. It does the job, with an 18 inch full stroke and 6 inch drop down leg. It’s tough, with hardened steel gears. It’s secure, with weather protected switches and a water resistant enclosure. It’s versatile, fitting all A-Frame couplers. It’s economical, with a low 15A draw at rated load. And it’s convenient, with three LED work lights, a built-in connector storage bracket not found on any other power jack, and a 30A circuit breaker. Less Friction: The Brute is the only power jack in its price range that has a ball screw, which reduces friction compared to the ACME screw used on some other brands. The ball bearings roll through the threads on the Brute’s shaft and nut. • Allows the motor to work less • Draws less amperage • Creates less heat • Reduces noise • Increases motor and jack life. The Husky Brute is the new standard in RV jacks. 

87248 $269.99
87489 Husky Brute Power Jack,

3000# 2"

 Model HB3000/2, with 3,000 lb. capacity and a slimmer 2” outer tube diameter.

All the features of the model HB3000 Brute Jack, except the drop down leg. The Husky Brute is loaded with features not found on some other power jacks. The Brute is fast, with a travel speed of 10 inches 43 seconds. It does the job, with an 18 inch full stroke and 6 inch drop down leg. It’s tough, with hardened steel gears. It’s secure, with weather protected switches and a water resistant enclosure. It’s versatile, fitting all A-Frame couplers. It’s economical, with a low 15A draw at rated load. And it’s convenient, with three LED work lights, a built-in connector storage bracket not found on any other power jack, and a 30A circuit breaker. Less Friction: The Brute is the only power jack in its price range that has a ball screw, which reduces friction compared to the ACME screw used on some other brands. The ball bearings roll through the threads on the Brute’s shaft and nut. • Allows the motor to work less • Draws less amperage • Creates less heat • Reduces noise • Increases motor and jack life. The Husky Brute is the new standard in RV jacks.

87489 $269.99
Part Number

Jack Accessories

Order Number Price
76621 Tongue Jack Stand A10-0900 $19.99
86661 Universal Tongue Jack Cover

Waterproof

Fits all electric jacks

38-944020 $15.99

If you need to order please call us toll free at 1-866-756-9494